Ultimaker 2+
FDM/FFF 3D Printer - standard size
The Ultimaker 2 is an easy-to-use, high-speed, accurate, and reliable desktop 3D printer. It not only has industry leading layer resolution (up to 20 microns), but also a large build ratio (part-to-printer size ratio) amongst desktop 3D printers.
Its open filament system does not restrict the users to only using filaments produced by Ultimaker.
Ultimaker has a large user community who is open to sharing ideas and knowledge, allowing its users to gain the best out of their 3D printers.
Features and Specifications
| Layer resolution | up to 20 micron |
| Position precision X Y Z: | 12.5 / 12.5 / 5 micron |
| Print speed: | 30mm/s-120mm/s |
| Travel speed: | 30mm/s-350mm/s |
| Recommended filament diameter: | 2.85mm |
| Nozzle diameter: | 0.4mm |
| Stand alone printing | SD card |
| Software: | Cura-official Ultimaker, Simplify3d,Kisslicer,Reptitier and more |
| Nozle temp | up to 2600C |
| Heated Bed | 500C-1000C |
| Build Volume | L= 223 mm, W=223 mm, H=205 mm |
All Rights Reserved. 2022 © Faculty of Architecture and Town Planning. The Technion, Haifa. Created by Catom web design.