Resistance Welder – Pei Point

Home › Technologies › Wood and Metal Working › Resistance Welder – Pei Point

Pei Point PBP 136 S1

Contact welding machine with radial stroke of electrodes PEI-POINT series PBP.

These stationary radial type machines are designed to perform a wide range of tasks in the field of spot welding of steel parts. The radial type of machines is characterized by the fact that rotary motion is used to create a force on the electrodes. Such machines have a foot drive from an air cylinder. High functionality of this device makes it possible to work in hard-to-reach places and with workpieces of various sizes and shapes.

Features of the PBP series:

– electromechanical pedal operator with pneumatic drive gives complete control over the welding process, eliminating the risk of untimely start / interruption of welding;

– the force on the electrodes is regulated by a pneumatic filter regulator unit with a semi-automatic condensate drain system;

– the pneumatic cylinder does not require lubrication;

– valve-controlled closing / opening of electrodes;

– low noise level of air release thanks to special silencers;

– water cooling of the transformer, arms along the entire length and electrodes increases the permissible time of continuous operation of the apparatus and allows working with sheets of metal of greater thickness;

– built-in overheating protection: warning of approach to the maximum permissible temperature, automatic shutdown when a critical value is reached;

– digital welding controller PX1700 with a wide range of functionality that provides control over the welding process. It has a built-in memory, supports recording up to 10 (optionally up to 100) different welding programs. Allows you to adjust the welding time, current rise time, number and frequency of welding pulses, electrode retention time after welding, automatic repetition of the welding cycle, etc.;

___________________

Shoulders and electrodes:

PBP machines are able to work with 400-800 mm long arms with various types of electrical holders, as well as with a variety of electrodes designed for specific conditions and tasks – central, flat, contour, offset, hinged, etc.

Below are some options for using different arms and electrodes: